M.P. EMPLOYEES SELECTION BOARD BHOPAL
मध्यप्रदेश कर्मचारी चयन मंडल, भोपाल
तकनीकी शिक्षा, कौशल विकास और रोजगार विभाग के अंतर्गत आईटीआई में प्रशिक्षण अधिकारियों के पदों की
चयन परीक्षा 2024 मध्य प्रदेश
MPPEB ITI Training Officer Electrician Preparation Book
Selection Examination for the posts of Training Officers in ITI under Department of Technical Education,
Skill Development and Employment 2024
ITI Training Officer Recruitment Test 2024 MADHYA PRADESH
आप सरकारी नौकरी का सपना रखते हैं तो मध्यप्रदेश सरकार की इस भर्ती के माध्यम से पूरा कर सकते हैं. यदि आपने आईटीआई में डिप्लोमा ले रखा है और आप सरकारी नौकरी की तलाश में हैं तो मध्यप्रदेश के तकनीकी शिक्षा, कौशल विकास और रोजगार विभाग ने आईटीआई में प्रशिक्षण अधिकारियों के पदों की चयन परीक्षा का विज्ञापन जारी किया है.
Bank Jobs
 |
| Sarkari Naukri - Govt Jobs (sarkarinaukrineeti.in) |
सरकारी नौकरियों की Latest updates के लिए visit करें.
www.sarkarinaukrineeti.in
Important Dates
आवेदन पत्र भरने के प्रारंभ तिथि : 09 अगस्त 2024
आवेदन पत्र भरने के अंतिम तिथि : 23 अगस्त 2024
आवेदन पत्र भरने में संशोधन की अंतिम तिथि : 28 अगस्त 2024
Application Fees
General: 500
SC / ST/ OBC/ EWS: 250
Age Limit
Minimum Age: 18 Years
Maximum Age: 40 Years
Age Relaxation & other information in advertisement
Educational Qualification
10th with ITI
More information in advertisement www.esb.mp.gov.in
Salary
36200-103600
पद के अनुसार अलग-अलग
सरकारी नौकरियों की Latest updates के लिए visit करें.
www.sarkarinaukrineeti.in
Total Post 450
GEN-131
EWS-40
OBC-119
SC-71
ST-89
 |
| Sarkari Naukri - Govt Jobs (sarkarinaukrineeti.in) |
Recruitment Related Links
Apply Online:
Download Notification:
Official Website:
Govt Jobs:
सरकारी नौकरियों की Latest updates के लिए visit करें.
www.sarkarinaukrineeti.in
Syllabus
Objective type Questions for all Posts: 25 Marks
Science & MathematicsGeneral Knowledge
Technical Knowledge
Basic Computer Knowledge
HP Laptop
Trade Related Syllabus
Directorate of Skill Development
Govt. of Madhya Pradesh
Recruitment - 2024
Syllabus for Training Officer
Syllabus for Training Officer - Fitter:
(पेपर कोड A )
1.Plan and organize the work to make job as per specification applying different types of
basic fitting operation and Check for dimensional accuracy following safety precautions.
[Basic fitting operation – Marking, Hacksawing, Chiselling, Filing, Drilling, Taping and
Grinding etc. Accuracy: ± 0.25mm] CSC/N0304 2. Manufacture simple sheet metal items as
per drawing and join them by soldering, brazing and riveting. CSC/N03001 3. Join metal
components by riveting observing standard procedure. CSC/N0304 4. Join metal component
by arc welding observing standard procedure. CSC/N0304 5. Cut and join metal component
by gas (oxyacetylene) CSC/N0304 6. Produce components by different operations and check
accuracy using appropriate measuring instruments. [Different Operations - Drilling, Reaming,
Taping, Dieing; Appropriate Measuring Instrument – Vernier, Screw Gauge, Micrometer]
CSC/N0304 7. Make different fit of components for assembling as per required tolerance
observing principle of interchange ability and check for functionality. [Different Fit – Sliding,
Angular, Step fit, ‘T’ fit, Square fit and Profile fit; Required tolerance: ±0.04 mm, angular
tolerance: 30 min.] CSC/N0304 8. Produce components involving different operations on
lathe observing standard procedure and check for accuracy. [Different Operations – facing,
plain turning, step turning, parting, chamfering, shoulder turn, grooving, knurling, boring,
taper turning, threading (external ‘V’ only)] CSC/N0110 9. Plan & perform simple repair,
overhauling of different machines and check for functionality. [Different Machines – Drill
Machine, Power Saw, Bench Grinder and Lathe] 10. Read and apply engineering drawing for
different application in the field of work. 11. Demonstrate basic mathematical concept and
principles to perform practical operations. Understand and explain basic science in the field
of study, 12. Make & assemble components of different mating surfaces as per required
tolerance by different surface finishing operations using different fastening components, tools
and check functionality. [Different Mating Surfaces – Dovetail fitting, Radius fitting,
Combined fitting; Different surface finishing operations – Scraping, Lapping and Honing;
Different fastening components – Dowel pins, screws, bolts, keys and cotters; Different
fastening tools-hand operated & power tools, Required tolerance - ±0.02mm, angular
tolerance ± 10 min.] CSC/N0304 13. Make different gauges by using standard tools &
equipment and checks for specified accuracy. [Different Gauges – Snap gauge, Gap gauge;
Specified Accuracy - ±0.02mm] CSC/N0304 14. Apply a range of skills to execute pipe
joints, dismantle and assemble valves & fittings with pipes and test for leakages. [Range of
skills – Cutting, Threading, Flaring, Bending and Joining] CSC/N0304 15. Make drill jig &
produce components on drill machine by using jigs and check for correctness. CSC/N0304
16. Plan, dismantle, repair and assemble different damaged mechanical components used for
power transmission & check functionality. [Different Damage Mechanical Components –
Pulley, Gear, Keys, Jibs and Shafts.] CSC/N0304 17. Identify, dismantle, replace and
assemble different pneumatics and hydraulics components. [Different components –
Compressor, Pressure Gauge, Filter Regulator Lubricator, Valves and Actuators.] 18.
Construct circuit of pneumatics and hydraulics observing standard operating procedure&
safety aspect. 19. Plan & perform basic day to day preventive maintenance, repairing and
check functionality. [Simple Machines – Drill Machine, Power Saw and Lathe] CSC/N0304
20. Plan, erect simple machine and test machine tool accuracy. [Simple Machines – Drill
Machine, Power Saw and Lathe] 21. Read and apply engineering drawing for different
application in the field of work. 22. Demonstrate basic mathematical concept and principles
to perform practical operations. Understand and explain basic science in the field of study.
Syllabus for Training Officer - Welder (पेपर कोड B )
1. Set the gas welding plant and join MS sheet in different position following safety
precautions. [Different position: - 1F, 2F, 3F, 1G, 2G, 3G.] (NOS: CSC/N0204)
2. Set the SMAW machine and perform different type of joints on MS in different position
observing standard procedure. [different types of joints- Fillet ( T-joint, lap & Corner), Butt
(Square & V); different position - 1F, 2F, 3F,4F, 1G, 2G, 3G, 4G] (NOS: CSC/N0204)
3. Set the oxy- acetylene cutting plant and perform different cutting operations on MS plate.
[Different cutting operation – Straight, Bevel, circular] (NOS: CSC/N0201)
4. Perform welding in different types of MS pipe joints by Gas welding (OAW). [Different
types of MS pipe joints – Butt, Elbow, T-joint, angle (45) joint, flange joint] (NOS:
CSC/N0204)
5. Set the SMAW machine and perform welding in different types of MS pipe joints by
SMAW. [Different types of MS pipe joints – Butt, Elbow, T-joint, angle (45) joint, flange
joint] (NOS: CSC/N0204)
6. Choose appropriate welding process and perform joining of different types of metals and
check its correctness. [appropriate welding process – OAW, SMAW; Different metal – SS,
CI, Brass, Aluminium] (NOS: CSC/N0204)
7. Demonstrate arc gouging operation to rectify the weld joints. (NOS: CSC/N0204)
8. Test welded joints by different methods of testing. [different methods of testing- Dye
penetration test, Magnetic particle test, Nick break test, Free band test, Fillet fracture test]
(NOS: CSC/N0204)
9. Set GMAW machine and perform welding in different types of joints on MS sheet/plate by
GMAW in various positions by dip mode of metal transfer. [different types of jointsFillet ( T
joint, lap, Corner), Butt (Square & V); various positions- 1F, 2F, 3F,4F, 1G, 2G, 3G] (NOS:
CSC/N0209)
10. Set the GTAW machine and perform welding by GTAW in different types of joints on
different metals in different position and check correctness of the weld. [different types of
joints- Fillet ( T-joint, lap, Corner), Butt (Square & V) ; different metals- Aluminium,
Stainless Steel; different position- 1F & 1G] (NOS: CSC/N0212)
11. Perform Aluminium & MS pipe joint by GTAW in flat position. (NOS: CSC/N0212)
12. Set the Plasma Arc cutting machine and cut ferrous & non-ferrous metals. (NOS:
CSC/N0207)
13. Set the resistance spot welding machine and join MS& SS sheet. (NOS: CSC/N0206)
14. Perform joining of different similar and dissimilar metals by brazing operation as per
standard procedure. Different similar and dissimilar metals- Copper, MS, SS] CSC/N9410
15. Repair Cast Iron machine parts by selecting appropriate welding process. [Appropriate
welding process- OAW, SMAW] CSC/N9411
16. Hard facing of alloy steel components/ MS rod by using hard facing electrode.
CSC/N9412 17. Read and apply engineering drawing for different application in the field of work.
CSC/N9401
18. Demonstrate basic mathematical concept and principles to perform practical operations.
Understand and explain basic science in the field of study. CSC/N9402
सरकारी नौकरियों की Latest updates के लिए visit करें.
www.sarkarinaukrineeti.in
Syllabus for training officer-Electrician:
(पेपर कोड C )
Prepare profile with an appropriate accuracy as- per drawing following safety precautions.
(NOS:PSS/N2001) 2. Prepare electrical wire joints; carry out soldering, crimping and
measure insulation resistance of underground cable.(NOS:PSS/N0108) 3.Verify
characteristics of electrical and magnetic circuits.(NOS:PSS/N6001,PSS/N6003) 4. Install,
test and maintenance of batteries and solar cell.(NOS:PSS/N6001) 5. Estimate, Assemble,
install and test wiring system. (NOS:PSS/N6001) 6. Plan and prepare Earthing installation.
(NOS:PSS/N6002) 7. Plan and execute electrical illumination system and test.
(NOS:PSS/N9403) 8. Select and perform measurements using analog/digital instruments and
install/ diagnose smart meters. (NOS:PSS/N1707) 9. Perform testing, verify errors and
calibrate instruments. (NOS:PSS/N9404) 10. Plan and carry out installation, fault detection
and repairing of domestic appliances.(NOS:PSS/N6003) 11. Execute testing, evaluate
performance and maintenance of transformer.(NOS:PSS/N2406,PSS/N2407) 12. Read and
apply engineering drawing for different application in the field of work. (NOS:PSS/N9401)
13. Demonstrate basic mathematical concept and principles to perform practical operations.
Understand and explain basic science in the field of study. (NOS:PSS/N9402) 14. Plan,
execute commissioning and evaluate performance of DC machines.(NOS:PSS/N4402)
15.Execute testing, and maintenance of DC machines and motor starters. (NOS:PSS/N4402)
16. Plan, execute commissioning and evaluate performance of AC motors.(NOS:PSS/N1709)
17. Execute testing, and maintenance of AC motors and starters.(NOS:PSS/N1709) 18. Plan,
Execute testing, evaluate performance and carry out maintenance of Alternator / MG set.
(NOS:PSS/PSS/N9405) 19. Execute parallel Operation of alternators. (NOS:PSS/N9405) 20.
Distinguish, organise and perform motor winding. (NOS:PSS/N4402) 21. Assemble simple
electronic circuits and test for functioning. (NOS:PSS/N9406) 22.Assemble accessories and
carry out wiring of control cabinets and equipment. (NOS:PSS/N9407) 23. Perform speed
control of AC and DC motors by using solid state devices. (NOS:PSS/N9408) 24.Detect the
faults and troubleshoot inverter, stabilizer,battery charger, emergency light and UPS etc.
(NOS:PSS/N6002) 25. Plan, assemble and install solar panel. (NOS:PSS/N9409) 26. Erect
overhead domestic service line, outline various power plant layout and explain smart
distribution grid and its component. (NOS:PSS/N0106) 27. Examine the faults and carry out
repairing of circuit breakers. (NOS:PSS/N7001) 28. Install and troubleshoot Electric Vehicle
charging stations. (NOS:PSS/N9410) 29. Read and apply engineering drawing for different
application in the field of work. (NOS:PSS/N9401) 30. Demonstrate basic mathematical
concept and principles to perform practical operations. Understand and explain basic science
in the field of study.
Syllabus for Training Officer- Computer Operator and Programming Assistant : (पेपर कोड D )
1. Install and setup operating system and related software in a computer following safety
precautions.(NOS: SSC/N3022) 2. Create,format and edit document using word processing
application software(NOS:SSC/N3022) 3. Create, format edit and develop a workbook by
using spreadsheet application software. (NOS: SSC/N3022) 4. Create and customize slides
for presentation. (NOS: SSC/N3022) 5.Create and manage database file using MySQL.
(NOS: SSC/N9401) 6. Install, setup/configure, troubleshoot and secure computer network
including Internet. (NOS: SSC/N3022) 7. Develop web pages using HTML and
CSS.(NOS:SSC/N0503, SSC/NOS501) 8. Develop web pages using Java Script.
(NOS:SSC/N0503, SSC/N0501) 9. Create workbooks with advanced formulae,
macros,charts, pivot tables and demonstrate ability to use Power tools. (NOS: SSC/N9402)
10. Browse, select and transact using E commerce websites. (NOS: SSC/N9403) 11. Secure
information from Internet by using cyber security concept.(NOS:SSC/N9404) 12. Explain
Cloud concepts &services. (NOS: SSC/N9405) 13. Write programs using Python/ Java
language. (NOS: SSC/N9046, SSC/N9407)
Syllabus for Training Officer - Turner (पेपर कोड E )
1. Plan and organize the work to make job as per specification applying different types of
basic fitting operations & check for dimensional accuracy following safety precautions.
[Basic Fitting Operation – Marking, Hack sawing, filing, drilling, taping etc.]
(NOS:CSC/N0304)
2. Set different shaped jobs on different chuck and demonstrate conventional lathe machine
operation observing standard operation practice. [Different chucks: - 3 jaws & 4 jaws,
different shaped jobs: - round, hexagonal, square](NOS: CSC/N0110)
3. Prepare different cutting tool to produce jobs to appropriate accuracy by performing
different turning operations. [Different cutting tool – V tool, side cutting, parting, thread
cutting (both LH & RH), Appropriate accuracy: - ±0.06mm, Different turning operation –
Plain, facing, drilling, boring (counter & stepped), grooving, Parallel Turning, Step Turning,
parting, chamfering, U -cut, Reaming, internal recess, knurling. (NOS: CSC/N0110)
4. Test the alignment of lathe by checking different parameters and adjust the tool post.
[Different parameters – Axial slip of main spindle, true running of head stock, parallelism of
main spindle, alignment of both the centres.] (NOS: CSC/N0110)
5. Set different components of machine & parameters to produce taper/ angular components
and ensure proper assembly of the components. [Different component of machine: - Form
tool, Compound slide, tail stock offset, taper turning attachment. Different machine
parameters- Feed, speed, depth of cut.] (NOS: CSC/N0110)
6. Set the different machining parameter & tools to prepare job by performing different
boring operations. [Different machine parameter- Feed, speed & depth of cut; Different
boring operation – Plain, stepped & eccentric] (NOS: CSC/N0110)
7. Set the different machining parameters to produce different threaded components applying
method/ technique and test for proper assembly of the components. [Different thread: - BSW,
Metric, Square, ACME, Buttress.] (NOS: CSC/N0110)
8. Set the different machining parameter & lathe accessories to produce components applying
techniques and rules and check the accuracy. [Different machining parameters: - Speed, feed
& depth of cut; Different lathe accessories: - Driving Plate, Steady rest, dog carrier and
different centres.] (NOS: CSC/N0110)
9. Plan and perform basic maintenance of lathe & grinding machine and examine their
functionality. (NOS: CSC/N0110)
10. Read and apply engineering drawing for different application in the field of work. (NOS:
CSC/N9401)
11. Demonstrate basic mathematical concept and principles to perform practical operations.
Understand and explain basic science in the field of study. (NOS: CSC/N9402)
12. Plan & set the machine parameter to produce precision engineering component to
appropriate accuracy by performing different turning operation. [Appropriate accuracy -
±0.02mm/ (MT - 3) (proof turning); Different turning operation – Plain turning, taper turning,
boring threading, knurling, grooving, chamfering etc.] (NOS: CSC/N0110) 13. Set & Produce components on irregular shaped job using different lathe accessories.
[Different Lathe accessories: - Face plate, angle plate] (NOS: CSC/N0110)
14. Plan and set the machine using lathe attachment to produce different utility component/
item as per drawing. [Different utility component/ item – Crank shaft (single throw), stub
arbour with accessories etc.] (NOS: CSC/N0110)
15. Set the machining parameters and produce & assemble components by performing
different boring operations with an appropriate accuracy. [Different boring operation –
eccentric boring, stepped boring; appropriate accuracy - ±0.05mm] (NOS: CSC/N0110)
16. Calculate to set machine setting to produce different complex threaded component and
check for functionality. [Different complex threaded component- Half nut, multi start threads
(BSW, Metric & Square)] (NOS: CSC/N0110)
17. Set (both job and tool) CNC turn centre and produce components as per drawing by
preparing part programme. (NOS:CSC/NO115)
18. Manufacture and assemble components to produce utility items by performing different
operations & observing principle of interchangeability and check functionality. [Utility item: - screw jack/ vice spindle/ Box nut, marking block, drill chuck, collet chuck etc.; different
operations: - threading (Square, BSW, ACME, Metric), Thread on taper, different boring
(Plain, stepped)] (NOS:CSC/NO115)
19. Make a process plan to produce components by performing special operations on lathe
and check for accuracy. [Accuracy - ±0.02mm or proof machining & ±0.05mm bore; Special
operation – Worm shaft cutting (shaft) boring, threading etc.] (NOS:CSC/NO115)
20. Read and apply engineering drawing for different application in the field of work. (NOS:
CSC/N9401)
21. Demonstrate basic mathematical concept and principles to perform practical operations.
Understand and explain basic science in the field of study. (NOS: CSC/N9402)
More Syllabus for other Posts visit Official website or download notification on this website: